As we know that during concreting when we place wet concrete , it gets harden after certain standard time( 30 mins IST & 10hrs FST), considering same it had be decided upon by Civil design Engineers to take a factor of safety ranging from 1.54 to 1.57 to counter that shrinkage.

Learn MoreConcrete mix Design for M10 Grade concrete with pure PPC cement only is as follows; PPC Cement 53 Grade – 220 Kg Water Cement ratio (w/c) – 0.6 Free Water – 132 liters 20mm Metal / Aggregates – 666 Kg 10mm Metal / Aggregates – 539 Kg Crush Sand – 1038 Kg Admixture Dosage – 0.6% Admixture – 1.32 Kg Density of Concrete – 2596 Kg ...

Learn MoreCement mix design is often mistakenly referred to as “concrete mix design.” However, cement is simply one of the ingredients of concrete. It is a binding substance that allows concrete to set, harden, and adhere to other materials. Therefore, it cannot and should not be used interchangeably with concrete mix design.

Learn MoreConcrete Mix Design Different Grades of Concrete. 2017-5-17 Concrete Mix Design:-Concrete is a composite mixture which consists of Cement, Sand and Aggregate. Concrete mix design is the procedure for finding the right quantities of these materials to achieve the desired strength.

Learn MoreM10 M15 M20 etc. are all grades of concrete, The 'M' denotes 'Mix' followed by a number representing the compressive strength of that mix in N/mm^2.

Learn MoreConcrete mix design is the process of detrmining right proportions of cement, sand and aggregates for concrete to achieve target strength of concrete. The Advantages of concrete mix design is that it gives the right proportions of materials, thus making the concrete use economical in achieving required strength of structural members.

Learn MoreConcrete Mix Design One of the ultimate aims of studying the various properties of the materials of concrete, plastic concrete and hardened concrete, is to enable a concrete technologist to design a concrete mix for a particular strength and durability. The conditions that prevail at the site of work, in particular

Learn MoreThis is the step where we gather all the required information for designing a concrete mix from the client. The data required for mix proportioning is as follows. 1. Grade designation (whether M10, M15, M20 etc) 2. Type of cement to be used 3. Maximum nominal size of aggregates 4. Minimum & maximum cement content 5. Maximum water-cement ratio 6. Workability 7. Exposure conditions (As per IS-456-Table-4) 8. Maximum temperature of concrete at the time of placing 9. Method of transporting & placing

Learn MoreIS Code Method of Concrete Mix Design Procedure 1. Target strength for mean strength The target mean compressive strength at 28 days K = a statistical value , usually taken as 1.65 S = standard deviation for each grade of concrete( table 8 of I.S. 456 -2000 ) Values of K Accepted proportion of low results

Learn MoreMix proportion for M15 Concrete = Cement : F.A : C.A = 1 : 2 : 3.3. Read More: Concrete Mix Design Calculation for M20, M25, M30 Concrete with Procedure & Example Calculate Quantities of Materials for Concrete -Cement, Sand, Aggregates

Learn MoreM10 grade concrete will give a total characteristic strength of 10 MPa. Now, minimum grade of concrete required for structural components is M20. So, we can’t use M10 for structural components like footings, beams, etc.

Learn MoreNominal mix concrete Traditional way of mix proportion specified in terms of fixed ratios of Cement : Sand : coarse aggregate (In general by volume) 4 2.5 •Useful for small works •Useful for routine concrete construction •Limited up to M20 grade •Requires high cement content

Learn MoreStandard on concrete mix design (IS 10262) has been upgraded to include guidance and examples of designing concrete mixes using fly ash and slag. Provisions for compliance for requisite quality of concrete made using fly ash and slag have been duly covered for the manufacturers of ready-mixed concrete in the Indian Standard

Learn MoreCalculate the quantity of the different materials required to design a mix for a latex-modified concrete for an anti-corrosive floor. Cement : OPC 53 Grade Aggregates: River sand of Zone II, specific gravity 2.65 and graded river gravel 5-20 mm specific gravity 2.65.

Learn MoreThis concrete mixture ratio of 1 part cement, 1 parts sand, and 3 parts aggregate will produce a concrete mix of approximately 2500 to 3000 psi. Mixing water with this cement, sand, and aggregate will form a paste that will bind the materials together until the mix hardens.

Learn More